HomeAboutMailing ListList Chatter /0/0 216.73.217.25

PCTV800e

2026-11-12 by: Unkmar Via chugalug
From: Unkmar Via chugalug 
------------------------------------------------------

From: Unkmar unkmar gmail.com:
- - - - -  - - - - - - - - - - - - - - - - - - - - - - -

I have begun a journey that I do not expect to go far. I remember
traveling this path once before with failure.
(I am on Arch BTW)
Direct firmware load for xc3028-v27.fw failed with error -2
Could not load firmware xc3028-v27.fw

Well, this was going about as expected. Found this site. But the
download zip for the firmware is defunct.
https://www.linuxtv.org/wiki/index.php/Pinnacle_PCTV_HD_Pro_Stick_(800e)
Then I found this: https://github.com/mirrorforsupermarsx/mirror-pctv-driver
But I am not running Windows. So that doesn't seem to help me.
I have since found a few other Windows Driver mirrors.

I have spent about and hour and no luck so far.

-- Lucius L. Hilley III

Here is a dump from dmesg of when I plugged in the device.
---------
[2334433.256414] usb 3-11: new high-speed USB device number 14 using xhci_hcd
[2334433.465497] usb 3-11: config 1 interface 0 altsetting 1 endpoint
0x82 has invalid wMaxPacketSize 0
[2334433.483503] usb 3-11: New USB device found, idVendor=2304,
idProduct=0227, bcdDevice= 1.10
[2334433.483508] usb 3-11: New USB device strings: Mfr=3, Product=1,
SerialNumber=2
[2334433.483510] usb 3-11: Product: PCTV 800e
[2334433.483512] usb 3-11: Manufacturer: Pinnacle Systems
[2334433.483514] usb 3-11: SerialNumber: 070701020337
[2334433.529073] em28xx 3-11:1.0: New device Pinnacle Systems PCTV
800e @ 480 Mbps (2304:0227, interface 0, class 0)
[2334433.529077] em28xx 3-11:1.0: Audio interface 0 found (Vendor Class)
[2334433.529079] em28xx 3-11:1.0: Video interface 0 found: isoc
[2334433.529080] em28xx 3-11:1.0: DVB interface 0 found: isoc
[2334433.588497] em28xx 3-11:1.0: chip ID is em2882/3
[2334433.808492] em28xx 3-11:1.0: EEPROM ID = 1a eb 67 95, EEPROM hash
= 0xace5a4bf
[2334433.808497] em28xx 3-11:1.0: EEPROM info:
[2334433.808498] em28xx 3-11:1.0:       AC97 audio (5 sample rates)
[2334433.808499] em28xx 3-11:1.0:       500mA max power
[2334433.808500] em28xx 3-11:1.0:       Table at offset 0x27,
strings=0x168e, 0x1ca4, 0x246a
[2334433.866421] em28xx 3-11:1.0: Identified as Pinnacle PCTV HD Pro
Stick (card=17)
[2334433.866426] em28xx 3-11:1.0: analog set to isoc mode.
[2334433.866427] em28xx 3-11:1.0: dvb set to isoc mode.
[2334433.866530] usbcore: registered new interface driver em28xx
[2334433.882854] em28xx 3-11:1.0: Registering V4L2 extension
[2334433.948493] tvp5150 17-005c: tvp5150 (4.0) chip found @ 0xb8 (3-11:1.0)
[2334433.948497] tvp5150 17-005c: tvp5150am1 detected.
[2334435.050565] tuner: 17-0061: Tuner -1 found with type(s) Radio TV.
[2334435.056493] xc2028 17-0061: creating new instance
[2334435.056496] xc2028 17-0061: type set to XCeive xc2028/xc3028 tuner
[2334435.057458] em28xx 3-11:1.0: Direct firmware load for
xc3028-v27.fw failed with error -2
[2334435.057461] xc2028 17-0061: Could not load firmware xc3028-v27.fw.
[2334435.058476] em28xx 3-11:1.0: Config register raw data: 0xd0
[2334435.076479] em28xx 3-11:1.0: AC97 vendor ID = 0xffffffff
[2334435.085478] em28xx 3-11:1.0: AC97 features = 0x6a90
[2334435.085480] em28xx 3-11:1.0: Empia 202 AC97 audio processor detected
[2334437.106556] em28xx 3-11:1.0: V4L2 video device registered as video1
[2334437.106559] em28xx 3-11:1.0: V4L2 VBI device registered as vbi0
[2334437.106564] em28xx 3-11:1.0: V4L2 extension successfully initialized
[2334437.106565] em28xx: Registered (Em28xx v4l2 Extension) extension
[2334437.122734] em28xx 3-11:1.0: Binding audio extension
[2334437.122737] em28xx 3-11:1.0: em28xx-audio.c: Copyright (C) 2006
Markus Rechberger
[2334437.122738] em28xx 3-11:1.0: em28xx-audio.c: Copyright (C)
2007-2016 Mauro Carvalho Chehab
[2334437.122797] em28xx 3-11:1.0: Endpoint 0x83 high-speed on intf 0
alt 7 interval = 8, size 196
[2334437.122799] em28xx 3-11:1.0: Number of URBs: 1, with 64 packets
and 192 size
[2334437.122917] em28xx 3-11:1.0: Audio extension successfully initialized
[2334437.122919] em28xx: Registered (Em28xx Audio Extension) extension
[2334437.134827] em28xx 3-11:1.0: Binding DVB extension
[2334438.387449] lgdt330x 17-000e: Demod loaded for LGDT3303 chip
[2334438.387488] xc2028 17-0061: attaching existing instance
[2334438.387490] xc2028 17-0061: type set to XCeive xc2028/xc3028 tuner
[2334438.387493] em28xx 3-11:1.0: xc3028 attached
[2334438.387495] dvbdev: DVB: registering new adapter (3-11:1.0)
[2334438.387497] em28xx 3-11:1.0: DVB: registering adapter 0 frontend
0 (LG Electronics LGDT3303 VSB/QAM Frontend)...
[2334438.387502] dvbdev: dvb_create_media_entity: media entity 'LG
Electronics LGDT3303 VSB/QAM Frontend' registered.
[2334438.387840] dvbdev: dvb_create_media_entity: media entity
'dvb-demux' registered.
[2334438.404037] em28xx 3-11:1.0: DVB extension successfully initialized
[2334438.404042] em28xx: Registered (Em28xx dvb Extension) extension
[2334438.408686] em28xx 3-11:1.0: Registering input extension
[2334438.469817] Registered IR keymap rc-pinnacle-pctv-hd
[2334438.475466] rc rc0: Pinnacle PCTV HD Pro Stick as
/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:11:00.0/usb3/3-11/3-11:1.0/rc/rc0
[2334438.475495] rc rc0: lirc_dev: driver em28xx registered at minor =
0, scancode receiver, no transmitter
[2334438.475526] input: Pinnacle PCTV HD Pro Stick as
/devices/pci0000:00/0000:00:02.1/0000:05:00.0/0000:06:0c.0/0000:11:00.0/usb3/3-11/3-11:1.0/rc/rc0/input45
[2334438.475553] em28xx 3-11:1.0: Input extension successfully initialized
[2334438.475554] em28xx: Registered (Em28xx Input Extension) extension
---------



=============================================================== From: Michael Harrison Via chugalug ------------------------------------------------------ While it won't work on a laptop, my answer for over the air TV was a cheap TV tuner box and antenna, and an HDMI cable plugged into a monitor. Keep it in the RV, have used it two, maybe three times to seek out local-ish news when travelling. On Thu, Nov 12, 2026 at 5:40=E2=80=AFPM Unkmar Via chugalug wrote: d sb3/3-11/3-11:1.0/rc/rc0 sb3/3-11/3-11:1.0/rc/rc0/input45 d

=============================================================== From: Dave Brockman Via chugalug ------------------------------------------------------ From: Dave Brockman dave brockmans.com: - - - - - - - - - - - - - - - - - - - - - - - - - - - - How far down the rabbit hole do you want to go? 1) look in the AUR for an xc3028 firmware package 2) Extract it from Happauge Windows driver mkdir ~/xc3028 && cd ~/xc3028 wget=20 http://www.steventoth.net/linux/hvr1400/HVR-12x0-14x0-17x0_1_25_25271_WHQ= L.zip unzip -j HVR-12x0-14x0-17x0_1_25_25271_WHQL.zip Driver85/hcw85bda.sys # get extract_xc3028.pl from the kernel source tree=20 (scripts/extract_xc3028.pl) wget=20 https://raw.githubusercontent.com/torvalds/linux/master/scripts/extract_x= c3028.pl perl extract_xc3028.pl sudo cp xc3028-v27.fw /lib/firmware/ (The steventoth.net link has moved or gone offline at times. If it=E2=80=99= s=20 dead, search for the zip by its exact filename.) Reboot or reload the driver. sudo modprobe -r em28xx && sudo modprobe em28xx # use whichever driver=20 your card loads dmesg | grep -i xc3028 With Gratitude, Dave Brockman Senior Network Engineer Gig City Cloud, LLC =20 g nt =3D1, lass) hash dio (5 sample rates) ax power t offset 0x27, o TV. uner .fw. ideo1 0 on 6 0 s ion uner nd lized n r =3D ion

=============================================================== From: andrew mcelroy Via chugalug ------------------------------------------------------ From: andrew mcelroy sophrinix gmail.com: - - - - - - - - - - - - - - - - - - - - - - - - - - - - It sounds like this is already solved by Dave, but the other answer would be to just pick up an RTL-SDR stick and actually use it for TV rather than ham radio purposes. The firmware on those devices is well supported in Linux. On Tue, Nov 17, 2026 at 12:10=E2=80=AFPM Dave Brockman Via chugalug wrote: =3D =3D =3D80=3D99=3D =3D20 20 =3D =3D =3D ct=3D =3D OM=3D =3DC2=3DA0AC97 au=3D =3DC2=3DA0500mA m=3D =3DC2=3DA0Table a=3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D =3D