[Chugalug] birth

Ed King chevyiinova at bellsouth.net
Sat Aug 3 04:42:48 UTC 2013


verbatim except for the serial number

kinda curious why the cpu serial number appears on the "kernel command line"...   does that mean its edit-able?  hmmm, will have to research that in my spare time.





pi at raspberrypi ~ $ w
 04:32:01 up 2 min,  2 users,  load average: 0.09, 0.16, 0.07
USER     TTY      FROM             LOGIN@   IDLE   JCPU   PCPU WHAT
root     tty1                      26Jul13 15920days  0.75s  0.04s whiptail --titl
pi       pts/0    fastweasel       04:31    1.00s  1.26s  0.03s w
pi at raspberrypi ~ $ cat /proc/cpuinfo 
Processor    : ARMv6-compatible processor rev 7 (v6l)
BogoMIPS    : 697.95
Features    : swp half thumb fastmult vfp edsp java tls 
CPU implementer    : 0x41
CPU architecture: 7
CPU variant    : 0x0
CPU part    : 0xb76
CPU revision    : 7

Hardware    : BCM2708
Revision    : 000d
Serial        : 0ICU812
pi at raspberrypi ~ $ free
             total       used       free     shared    buffers     cached
Mem:        448776      60500     388276          0       9560      27076
-/+ buffers/cache:      23864     424912
Swap:       102396          0     102396
pi at raspberrypi ~ $ df
Filesystem     1K-blocks    Used Available Use% Mounted on
rootfs           1804128 1543392    169088  91% /
/dev/root        1804128 1543392    169088  91% /
devtmpfs          216132       0    216132   0% /dev
tmpfs              44880     236     44644   1% /run
tmpfs               5120       0      5120   0% /run/lock
tmpfs              89740       0     89740   0% /run/shm
/dev/mmcblk0p1     57288   18888     38400  33% /boot
pi at raspberrypi ~ $ ip addr show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether b8:27:eb:4f:a9:2a brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.95/24 brd 255.255.255.255 scope global eth0
pi at raspberrypi ~ $ dmesg
[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.6.11+ (dc4 at dc4-arm-01) (gcc version 4.7.2 20120731 (prerelease) (crosstool-NG linaro-1.13.1+bzr2458 - Linaro GCC 2012.08) ) #474 PREEMPT Thu Jun 13 17:14:42 BST 2013
[    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: BCM2708
[    0.000000] cma: CMA: reserved 16 MiB at 1b000000
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 114688
[    0.000000] free_area_init_node: node 0, pgdat c053b854, node_mem_map c05e5000
[    0.000000]   Normal zone: 896 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 113792 pages, LIFO batch:31
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113792
[    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708.boardrev=0xd bcm2708.serial=0ICU812  smsc95xx.macaddr=B8:27:EB:4F:A9:2A sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 448MB = 448MB total
[    0.000000] Memory: 432264k/432264k available, 26488k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdc800000 - 0xff000000   ( 552 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdc000000   ( 448 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc04e647c   (4986 kB)
[    0.000000]       .init : 0xc04e7000 - 0xc0507f24   ( 132 kB)
[    0.000000]       .data : 0xc0508000 - 0xc053c080   ( 209 kB)
[    0.000000]        .bss : 0xc053c0a4 - 0xc05e4758   ( 674 kB)
[    0.000000] NR_IRQS:330
[    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty1] enabled
[    0.001023] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[    0.060125] pid_max: default: 32768 minimum: 301
[    0.060459] Mount-cache hash table entries: 512
[    0.061217] Initializing cgroup subsys cpuacct
[    0.061272] Initializing cgroup subsys devices
[    0.061305] Initializing cgroup subsys freezer
[    0.061335] Initializing cgroup subsys blkio
[    0.061426] CPU: Testing write buffer coherency: ok
[    0.061759] hw perfevents: enabled with v6 PMU driver, 3 counters available
[    0.061899] Setting up static identity map for 0x39d698 - 0x39d6f4
[    0.063389] devtmpfs: initialized
[    0.074010] NET: Registered protocol family 16
[    0.080455] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.081553] bcm2708.uart_clock = 0
[    0.082946] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.083000] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.083036] mailbox: Broadcom VideoCore Mailbox driver
[    0.083132] bcm2708_vcio: mailbox at f200b880
[    0.083233] bcm_power: Broadcom power driver
[    0.083273] bcm_power_open() -> 0
[    0.083298] bcm_power_request(0, 8)
[    0.583988] bcm_mailbox_read -> 00000080, 0
[    0.584031] bcm_power_request -> 0
[    0.584057] Serial: AMBA PL011 UART driver
[    0.584201] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[    0.908036] console [ttyAMA0] enabled
[    0.931684] bio: create slab <bio-0> at 0
[    0.936566] SCSI subsystem initialized
[    0.940659] usbcore: registered new interface driver usbfs
[    0.946247] usbcore: registered new interface driver hub
[    0.951847] usbcore: registered new device driver usb
[    0.958206] Switching to clocksource stc
[    0.962442] FS-Cache: Loaded
[    0.965576] CacheFiles: Loaded
[    0.980341] NET: Registered protocol family 2
[    0.985617] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.993355] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[    1.000143] TCP: Hash tables configured (established 16384 bind 16384)
[    1.006749] TCP: reno registered
[    1.010003] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    1.015900] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    1.022492] NET: Registered protocol family 1
[    1.027361] RPC: Registered named UNIX socket transport module.
[    1.033406] RPC: Registered udp transport module.
[    1.038128] RPC: Registered tcp transport module.
[    1.042874] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.049988] bcm2708_dma: DMA manager at f2007000
[    1.054780] bcm2708_gpio: bcm2708_gpio_probe c0515d98
[    1.060247] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[    1.069395] audit: initializing netlink socket (disabled)
[    1.074985] type=2000 audit(0.930:1): initialized
[    1.196773] VFS: Disk quotas dquot_6.5.2
[    1.200808] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.207869] FS-Cache: Netfs 'nfs' registered for caching
[    1.213622] NFS: Registering the id_resolver key type
[    1.218786] Key type id_resolver registered
[    1.223078] Key type id_legacy registered
[    1.227442] msgmni has been set to 876
[    1.232976] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.240691] io scheduler noop registered
[    1.244731] io scheduler deadline registered (default)
[    1.249917] io scheduler cfq registered
[    1.264672] Console: switching to colour frame buffer device 82x26
[    1.276058] kgdb: Registered I/O driver kgdboc.
[    1.283187] vc-cma: Videocore CMA driver
[    1.288981] vc-cma: vc_cma_base      = 0x00000000
[    1.295597] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
[    1.302803] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
[    1.318870] brd: module loaded
[    1.328595] loop: module loaded
[    1.333828] vchiq: vchiq_init_state: slot_zero = 0xdb000000, is_master = 0
[    1.343197] Loading iSCSI transport class v2.0-870.
[    1.350772] usbcore: registered new interface driver smsc95xx
[    1.358536] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.571179] Core Release: 2.80a
[    1.576104] Setting default values for core params
[    1.582647] Finished setting default values for core params
[    1.795021] Using Buffer DMA mode
[    1.800023] Periodic Transfer Interrupt Enhancement - disabled
[    1.807535] Multiprocessor Interrupt Enhancement - disabled
[    1.814819] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.820858] Dedicated Tx FIFOs mode
[    1.827008] dwc_otg: Microframe scheduler enabled
[    1.827419] dwc_otg bcm2708_usb: DWC OTG Controller
[    1.834164] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[    1.843240] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[    1.850487] Init: Port Power? op_state=1
[    1.856198] Init: Power Port (0)
[    1.861218] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.869882] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.878973] usb usb1: Product: DWC OTG Controller
[    1.885545] usb usb1: Manufacturer: Linux 3.6.11+ dwc_otg_hcd
[    1.893154] usb usb1: SerialNumber: bcm2708_usb
[    1.900221] hub 1-0:1.0: USB hub found
[    1.905851] hub 1-0:1.0: 1 port detected
[    1.911814] dwc_otg: FIQ enabled
[    1.911832] dwc_otg: NAK holdoff enabled
[    1.911853] Module dwc_common_port init
[    1.912078] Initializing USB Mass Storage driver...
[    1.918980] usbcore: registered new interface driver usb-storage
[    1.926787] USB Mass Storage support registered.
[    1.933307] usbcore: registered new interface driver libusual
[    1.941086] mousedev: PS/2 mouse device common for all mice
[    1.949191] bcm2835-cpufreq: min=700000 max=700000 cur=700000
[    1.956873] bcm2835-cpufreq: switching to governor powersave
[    1.964308] bcm2835-cpufreq: switching to governor powersave
[    1.971638] cpuidle: using governor ladder
[    1.977398] cpuidle: using governor menu
[    1.982996] sdhci: Secure Digital Host Controller Interface driver
[    1.990810] sdhci: Copyright(c) Pierre Ossman
[    1.996880] sdhci: Enable low-latency mode
[    2.042486] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
[    2.053818] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[    2.063627] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.076825] usbcore: registered new interface driver usbhid
[    2.084290] usbhid: USB HID core driver
[    2.094689] TCP: cubic registered
[    2.101925] Initializing XFRM netlink socket
[    2.110201] Indeed it is in host mode hprt0 = 00021501
[    2.117257] NET: Registered protocol family 17
[    2.132493] Key type dns_resolver registered
[    2.142707] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[    2.183153] registered taskstats version 1
[    2.190193] Waiting for root device /dev/mmcblk0p2...
[    2.214103] mmc0: read SD Status register (SSR) after 4 attempts
[    2.235679] mmc0: new high speed SDHC card at address aaaa
[    2.251025] mmcblk0: mmc0:aaaa SU08G 7.40 GiB 
[    2.259223]  mmcblk0: p1 p2
[    2.362370] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.372769] Indeed it is in host mode hprt0 = 00001101
[    2.498222] EXT4-fs (mmcblk0p2): recovery complete
[    2.506738] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.518690] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    2.527895] devtmpfs: mounted
[    2.533290] Freeing init memory: 128K
[    2.592914] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[    2.601721] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.611664] hub 1-1:1.0: USB hub found
[    2.618227] hub 1-1:1.0: 3 ports detected
[    2.902699] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    3.012951] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    3.021938] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.042701] smsc95xx v1.0.4
[    3.107148] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:4f:a9:2a
[    3.866053] udevd[154]: starting version 175
[    5.003518] Registered led device: led0
[    8.543047] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    8.945958] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[   17.981521] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[   22.337917] Adding 102396k swap on /var/swap.  Priority:-1 extents:2 across:507900k SS
[   82.432486] usb 1-1.2: new low-speed USB device number 4 using dwc_otg
[   82.556130] usb 1-1.2: New USB device found, idVendor=1241, idProduct=1603
[   82.556160] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   82.556177] usb 1-1.2: Product: USB Keyboard
[   82.556191] usb 1-1.2: Manufacturer:  
[   82.580653] input:   USB Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/input/input0
[   82.586088] hid-generic 0003:1241:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-bcm2708_usb-1.2/input0
[   82.609652] input:   USB Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.1/input/input1
[   82.610015] hid-generic 0003:1241:1603.0002: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-bcm2708_usb-1.2/input1

pi at raspberrypi ~ $ ping yahoo.com
PING yahoo.com (98.139.183.24) 56(84) bytes of data.
64 bytes from ir2.fp.vip.bf1.yahoo.com (98.139.183.24): icmp_req=1 ttl=46 time=66.0 ms
64 bytes from ir2.fp.vip.bf1.yahoo.com (98.139.183.24): icmp_req=2 ttl=46 time=50.6 ms
^C
--- yahoo.com ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 1000ms
rtt min/avg/max/mdev = 50.670/58.364/66.058/7.694 ms



well that's all for now, got some demolition to do....
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://chugalug.org/pipermail/chugalug/attachments/20130802/094a99be/attachment-0001.html>


More information about the Chugalug mailing list