[Chugalug] Can't get oVirt going

Jonathan Calloway jonathancalloway at gmail.com
Sat Apr 20 00:57:51 UTC 2013


I didn't think it would matter. However, I cannot add a host to the 
domain.  From what I've read, it appears to be a database issue.

<JC>



On 04/19/2013 08:43 PM, Lynn Dixon wrote:
> The host found in failed state should be fine for now, its alarming 
> that you haven't gotten a host configured for your machines.  Just log 
> into the portal and go through the motions of adding the local machine 
> as a host in your datacenter, and that error should go away on 
> subsequent boots.
>
> Have had a hard time getting behind a computer since I have been 
> helping my wife post-surgery, and just now catching up with work 
> emails, and personal emails.
>
> If you need any further help, I will try to reply.
>
>
> On Fri, Apr 19, 2013 at 7:03 PM, Jonathan Calloway 
> <jonathancalloway at gmail.com <mailto:jonathancalloway at gmail.com>> wrote:
>
>     Update:
>
>     It looks like installing the apr dev package got me past it:
>
>     yum install apr-util-1.2.7-11.el5.x86_64
>
>     Now the next time I went through engine-setup, I got:
>
>     Error: Host was found in a 'Failed' state. Please check engine and
>     bootstrap installation logs.
>     Please check log file
>     /var/log/ovirt-engine/engine-setup_2013_04_19_13_49_42.log for
>     more information
>
>
>     However, I can get to the admin portal and log in, so I'm not sure
>     how detrimental this will be.
>
>
>     <JC>
>
>
>
>     On 04/19/2013 02:00 PM, Lynn Dixon wrote:
>>     Check out the video here:
>>     http://www.ovirt.org/Documentation
>>
>>     The very first video describes installing oVirt onto one single
>>     machine.  The allinone command is the command he issues in the video.
>>
>>
>>     On Fri, Apr 19, 2013 at 1:55 PM, JonathanCalloway
>>     <jonathancalloway at gmail.com <mailto:jonathancalloway at gmail.com>>
>>     wrote:
>>
>>         Lynn,
>>
>>         No; I did yum install ovirt engine (per the documentation)
>>
>>         <JC>
>>
>>         ------------------------------------------------------------------------
>>         *From: *"Lynn Dixon" <boodaddy at gmail.com
>>         <mailto:boodaddy at gmail.com>>
>>
>>         *To: *"Chattanooga Unix Gnu Android Linux Users Group"
>>         <chugalug at chugalug.org <mailto:chugalug at chugalug.org>>
>>         *Sent: *Friday, April 19, 2013 1:08:42 PM
>>
>>         *Subject: *Re: [Chugalug] Can't get oVirt going
>>
>>         Calloway,
>>         Did you install  the engine, node, hypervisor from the
>>         all-in-one package?
>>
>>         the command is:  yum install ovirt-engine-setup-plugin-allinone
>>
>>         That should get all of the packages needed to run ovirt on
>>         one machine.
>>
>>
>>         On Fri, Apr 19, 2013 at 9:05 AM, JonathanCalloway
>>         <jonathancalloway at gmail.com
>>         <mailto:jonathancalloway at gmail.com>> wrote:
>>
>>             William,
>>
>>             I was under the impression that oVirt didn't need Apache,
>>             and that the virtualization install of CentOS doesn't
>>             include it.  I probably just need to install Apache after
>>             all.  I did try service httpd start and got a "no such
>>             service" error
>>
>>             <JC>
>>
>>             ------------------------------------------------------------------------
>>             *From: *"William Wade" <willm.wade at gmail.com
>>             <mailto:willm.wade at gmail.com>>
>>             *To: *"Chattanooga Unix Gnu Android Linux Users Group"
>>             <chugalug at chugalug.org <mailto:chugalug at chugalug.org>>
>>             *Sent: *Friday, April 19, 2013 8:08:51 AM
>>             *Subject: *Re: [Chugalug] Can't get oVirt going
>>
>>
>>             Run a apachectl -t which checks the apache config file
>>             for errors.
>>
>>             It looks like this command: /sbin/chkconfig httpd on is
>>             the first one to fail. It says it is getting nothing from
>>             the standard error or output, but you might want to try
>>             running it manually and see what you get.
>>
>>
>>             On Fri, Apr 19, 2013 at 7:45 AM, Jonathan Calloway
>>             <jonathancalloway at gmail.com
>>             <mailto:jonathancalloway at gmail.com>> wrote:
>>
>>                 All (but mainly Lynn),
>>
>>                 So, I've installed CentOS 6 using a visualization
>>                 install.  I installed the packages and dependencies
>>                 for oVirt. However, when I run setup-engine and go
>>                 through the prompts, it fails to complete  with an
>>                 error about the HTTP service not being able to start.
>>
>>                 There error is:
>>
>>                 Installing:
>>                 Configuring oVirt Engine... [ DONE ]
>>                 Configuring JVM... [ DONE ]
>>                 Creating CA... [ DONE ]
>>                 Updating ovirt-engine service... [ DONE ]
>>                 Setting Database Configuration... [ DONE ]
>>                 Setting Database Security... [ DONE ]
>>                 Creating Database... [ DONE ]
>>                 Updating the Default Data Center Storage Type... [ DONE ]
>>                 Editing oVirt Engine Configuration... [ DONE ]
>>                 Editing Postgresql Configuration... [ DONE ]
>>                 Configuring the Default ISO Domain... [ DONE ]
>>                 Configuring Firewall... [ DONE ]
>>                 Starting ovirt-engine Service... [ DONE ]
>>                 Configuring HTTPD... [ ERROR ]
>>                 Error: Can't start the httpd service
>>                 Please check log file
>>                 /var/log/ovirt-engine/engine-setup_2013_04_19_02_21_58.log
>>                 for more information
>>
>>                 Here's the log:
>>
>>                 http://pastebin.com/mdx9jzPg
>>
>>                 Any help would be appreciated!
>>
>>                 <JC>
>>
>>
>>
>>                 _______________________________________________
>>                 Chugalug mailing list
>>                 Chugalug at chugalug.org <mailto:Chugalug at chugalug.org>
>>                 http://chugalug.org/cgi-bin/mailman/listinfo/chugalug
>>
>>
>>
>>             _______________________________________________
>>             Chugalug mailing list
>>             Chugalug at chugalug.org <mailto:Chugalug at chugalug.org>
>>             http://chugalug.org/cgi-bin/mailman/listinfo/chugalug
>>
>>
>>             _______________________________________________
>>             Chugalug mailing list
>>             Chugalug at chugalug.org <mailto:Chugalug at chugalug.org>
>>             http://chugalug.org/cgi-bin/mailman/listinfo/chugalug
>>
>>
>>
>>         _______________________________________________
>>         Chugalug mailing list
>>         Chugalug at chugalug.org <mailto:Chugalug at chugalug.org>
>>         http://chugalug.org/cgi-bin/mailman/listinfo/chugalug
>>
>>
>>         _______________________________________________
>>         Chugalug mailing list
>>         Chugalug at chugalug.org <mailto:Chugalug at chugalug.org>
>>         http://chugalug.org/cgi-bin/mailman/listinfo/chugalug
>>
>>
>>
>>
>>     _______________________________________________
>>     Chugalug mailing list
>>     Chugalug at chugalug.org  <mailto:Chugalug at chugalug.org>
>>     http://chugalug.org/cgi-bin/mailman/listinfo/chugalug
>
>
>     _______________________________________________
>     Chugalug mailing list
>     Chugalug at chugalug.org <mailto:Chugalug at chugalug.org>
>     http://chugalug.org/cgi-bin/mailman/listinfo/chugalug
>
>
>
>
> _______________________________________________
> Chugalug mailing list
> Chugalug at chugalug.org
> http://chugalug.org/cgi-bin/mailman/listinfo/chugalug

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://chugalug.org/pipermail/chugalug/attachments/20130419/b98a5fe8/attachment-0001.html>


More information about the Chugalug mailing list